PVD and CVD are the most commonly used surface treatment methods for tools and moulds, CVD is based on chemical vapour deposition and PVD is based on physical vapour deposition, as they differ in principle, the final coating results are different and each has its own focus in application. Read More

Surface treatment is a process method for forming a surface layer on the surface of a substrate material that differs from the mechanical, physical and chemical properties of the substrate. The purpose of surface treatment is to meet the product's requirements for corrosiSurface treatment is a process method for forming a surface layer on the surface of a substrate material that differs from the mechanical, physical and chemical properties of the substrate. The purpose of surface treatment is to meet the product's requirements for corrosion resistance, wear resistance, decoration or other special functions. The following are common surface treatments.on resistance, wear resistan Read More

PVD coating is a common tool coating used in industrial production and has been developed for a long time, and is widely used in cutting tools, tooling and other finishing industries. However, as the level of industrial production increases, the requirements for tool coatings are becoming higher and higher. Although the preparation methods are progressing, it is inevitable that there will still be some shortcomings in the preparation process. Read More

PVD coatings are currently available in dark gold, light gold, coffee, bronze, grey, black, grey-black and seven colours. The colour of the coating can be controlled by controlling the relevant parameters during the coating process; the colour can be quantified by measuring the colour with relevant instruments after the coating is completed to determine whether the colour produced meets the requirements. Read More

Vacuum coaters are becoming more and more widely used, but do you know how to maintain them? Read More

The specific principle of PVD (ion coating) technology is the use of low voltage, high current arc discharge technology under vacuum conditions, the use of gas discharge to evaporate the target material and make the evaporated material and gas are ionised, the use of electric field acceleration, so that the evaporated material and its reaction products deposited on the workpiece. Read More

The production conditions of die casting moulds are the most demanding, with metal solutions at high temperatures of 600-800°C, injection through high pressures and constant thermal expansion and contraction of the mould surface, resulting in a very short service life for die casting moulds, which constantly require mould repair and maintenance during production. The main causes of die casting mould failure are cracking, erosion, sticky material and deformation. Read More

Vacuum coating is a physical vapor deposition process (PVD) in which a metal or metal compound is deposited onto the surface of a material (usually a non-metallic material) in the form of a vapor phase under a vacuum environment. It is also called vacuum metallization because the coating is often a thin metal film. Vacuum coating in a broader sense also includes the vacuum vapor deposition of non-metallic functional films such as polymers on the surface of metallic or non-metallic materials. Read More

Specialised physical vapour deposition (PVD) coatings are widely recognised for the key role they play in improving operational performance and extending the life of parts in manufacturing and industry. Read More