The fluid polishing process (abrasive grain flow process), compared to conventional mechanical processing methods, has the following characteristics. Read More

Chemical polishing is a method of eliminating abrasion marks and leaching and levelling by the selective dissolution of chemical reagents on the uneven areas of the sample surface. Read More

The role of polishing is to reduce the surface roughness of the workpiece, in order to obtain a bright, flat surface, this article is mainly for you to explain the characteristics of mechanical polishing and the principle. Read More

Sandblasting is a process of surface treatment of workpieces. Compressed air is used as power to form a high-speed jet beam to spray material (copper ore, quartz sand, emery, iron sand, sea sand) at high speed onto the surface of the workpiece to be treated. Read More

Plasma polishing machine as a new polishing process, is a development trend of stainless steel polishing Read More

There are a total of three types of polishing machines, namely straight-centred machines, eccentric machines and forced eccentric machines.What is a straight centre machine? Read More

Ultrasonic polishing can be divided into the following categories according to the construction of the abrasives used and the processing method Read More

"Mould is the emperor of the metal processing industry" this sentence is the international mold association experts believe, and the basis of the mold industry is also mold materials. But because the new mould materials are still difficult to meet the higher demand for moulds, in the market today th Read More

Electropolishing process for steel materialsDue to the many types of steel materials, the composition varies greatly, different steel should be selected through the test polishing solution formula and operating conditions to obtain the best results. Read More

Polishing is a processing method that uses mechanical, chemical or electrochemical action to reduce the surface roughness of a workpiece in order to obtain a bright, flat surface. Read More

In the process of industrial products to diversify, high-grade development, how to improve the quality of moulds directly affect the quality of products is an important task. Read More

Grinding and polishing are different treatmentsGrinding processing refers to the use of abrasive particles coated or embedded in the research tool, through the relative movement of the research tool and the workpiece under a certain pressure on the processing surface for finishing processing. Read More

PVD (Physical VaporDeposition) is a technique for depositing thin films with a particular function on the surface of a substrate by physically vaporising the surface of the material source into atoms, molecules or ions under vacuum conditions. Read More

Sandblasting is the use of compressed air as the power to form a high-speed jet beam, the abrasive high-speed jet to the surface of the workpiece to be treated, so that the external surface of the workpiece physical changes to meet the quality requirements. Read More

Mirror polishing is a polishing process that gives a mirror effect to the surface of a product. The process is commonly used for lift cabins, aerospace equipment parts, moulds, automotive parts, medical machinery, decorative items, etc. Such products require a glossy appearance. The surface after polishing treatment is scarless, bright, smooth, no relief, no metal disturbance layer, no crater like mirror surface state, is the ideal mirror polishing effect. Read More