As a new polishing process, plasma polishing is a trend in stainless steel polishing. If we can make good use of plasma polishing will save us a lot of time and costs. Read More

The basic principleChemical polishing is to produce polishing effect without power supply, its polishing principle and the use of current effect of electrolytic polishing in the essence of not much difference. Read More

The surface of the workpiece shows residual chips and very fine microscopic metal particles on the surface, these are called burrs and the more burrs there are, the lower their quality standard, they travel in cutting, grinding and other similar chip processing processes. Read More

Polishing is a processing method that uses mechanical, chemical or electrochemical action to reduce the surface roughness of a workpiece in order to obtain a bright, flat surface. Read More

Mirror polishing is a polishing process that gives a mirror effect to the surface of a product. The process is commonly used for lift cabins, aerospace equipment parts, moulds, automotive parts, medical machinery, decorative items, etc. Such products require a glossy appearance. The surface after polishing treatment is scarless, bright, smooth, no relief, no metal disturbance layer, no crater like mirror surface state, is the ideal mirror polishing effect. Read More

Metallographic specimens need to be polished after grinding, in order to remove the abrasion marks and deformation layer produced by the grinding process on the specimen, so that it becomes a smooth mirror surface. The current methods of polishing specimens are mechanical polishing, electrolytic polishing, chemical polishing and compound polishing. The most commonly used polishing method is mechanical polishing. Read More